mcu是 90927,再选择MO0,MO1,MO2为1,1,0, contiune 后,load 程序时总报错,如下

reason:

--target was reseted

--target hangs,stays in a high prior loop or did not enable interrupt

--monitor IRQ-level is to low and answering is not possible in the specified time

--target is not connected

 target 肯定没问题,我这里有2个程序,NO1是可以load的,但发现不能STOP,一STOP程序就被弹出,无法方真

NO2就更是无法load;

看IRQ level等级为5,总是没错的;

软件里也将monitor用到 的程序和中断都开了,但仍解决不了问题,NO1的程序方真也该是有问题的,还请高手帮忙解决下..